System Analysis and Design (CSIT755)-Semester II

System Analysis and Design (CSIT755)-Semester II
We Also Provide SYNOPSIS AND PROJECT.
Contact www.kimsharma.co.in for best and lowest cost solution or
Email: amitymbaassignment@gmail.com
Call/what’s app: +91 8290772200
What’s app: +91 8800352777
Amity assignment solution help, Amity assignment answers help, Assignment Help
1st Module Assessment
The document prepared after the design phase is
Select one:
a. System specification
b. Performance specification
c. Design specification
d. None of these
Question 1. The classification of System may be considered
Select one:
a. Open or closed
b. Physical or abstract
c. Man-made inoformation ystem
d. All of the above
Clear my choice
Question 2. The approach used in top‐down analysis and design is
Select one:
a. to identify the top level functions by combining many smaller components into a single entity
b. to prepare flow charts after programming has been completed
c. to identify a top level function an d then create a hierarchy of lower‐level modules and components.
d. All of the above
Clear my choice
Question 3. In system concepts, meaning of organization is
Select one:
a. Implies structure and order
b. Means that parts of the computer system depend on one the another
c. Refers to the holism of systems
d. defines that each component functions with other components of the system
Clear my choice
Question 4. System analysis defines
Select one:
a. collection of facts and information
b. identifying the problem
c. interpreting facts
d. all of the above
Clear my choice
Question 5. SDLC stands for
Select one:
a. System Development Life Cycle
b. Structured Design Life Cycle
c. System Design Life Cycle
d. Structure development Life Cycle
Clear my choice
Question 6. The study of the system involves
Select one:
a. Study of existing system
b. identifying current deficiencies and set new goals
c. documenting the existing system
d. all of the above
Clear my choice
Question 7. The characteristics of well designed system are
Select one:
a. Practical
b. Effective
c. Reliable
d. Allof the above
Clear my choice
Question 8. Problem analysis is done during
Select one:
a. System design phase
b. System analysis phase
c. Before system test
d. All of the above
Clear my choice
Question 9. is contained by a system which is planned to reach a specific goal.
Select one:
a. Communication
b. interdependence
c. structure and behavior
d. None of the above
Clear my choice
Question 10. In the Analysis phase, the development of the _
occurs, which is a clear statement of the goals and objectives of the project.
Select one:
a. Documentation
b. Flowchart
c. Program specification
d. design
Clear my choice
Question 11. In organization’s process, ________should be the replica of the same. Select one: a. business, MIS b. financial , ERP c. financial, MIS d. business, ERP Clear my choice In business process, the transaction flow to ensure proper checks and approval are implemented is called: Select one: a. procedures b. workflow c. process flow d. process requirements Question 12. Analsis of the system specifies : Select one: a. What system should do b. how system should do c. (a) and (b) both d. None of these Clear my choice Question 13. Which of the following describes the central part of the ERP syetms? Select one: a. Information b. Employees c. Customers d. Database Clear my choice Question 14. The process automation components include: Select one: a. sensors b. controllers c. actuators d. all of the above Clear my choice Question 15. Which of the following practices used in SA/SD ? Select one: a. Gane and Sarson methodology b. DeMarco and Yourdon methodology c. Constantine and Yourdon methodology d. All of the above Clear my choice Question 16. ____ can be considered as latest and the most inclusive technique for solving computer problems.
Select one:
a. System Analysis
b. System data
c. System procedure
d. System record
Clear my choice
Question 17. In system dissatisfaction/failure, who are considered responsible for failure:
Select one:
a. Software companies
b. Software developer
c. Universities and colleges
d. All of the above

We Also Provide SYNOPSIS AND PROJECT.
Contact www.kimsharma.co.in for best and lowest cost solution or
Email: amitymbaassignment@gmail.com
Call/what’s app: +91 8290772200
What’s app: +91 8800352777
Amity assignment solution help, Amity assignment answers help, Assignment Help

2nd Module Assessment

Question 1. Requirement specification is carried out
Select one:
a. after requirements are determined
b. before requirements are determined
c. simultaneously with requirements determination
d. independent of requirements determination
Clear my choice
Question 2. The major goal of requirement determination phase of information system development is
Select one:
a. determine whether information is needed by an organization
b. determine what information is needed by an organization
c. determine how information needed by an organization can be provided
d. determine when information is to be given
Clear my choice
Question 3. How many phases are there in Requirement Analysis ?
Select one:
a. Three
b. Four
c. Five
d. Six
Clear my choice
Question 4. Which of the following is not the primary objectives in the preliminary investigation of system development?
Select one:
a. Assess cost and benefit of alternative approces
b. Determining the size of the project
c. Preparing the SRS to cover all the system specifications
d. Report finding to the management with recomendation to accept or reject the proposal
Clear my choice
Question 5
Not yet answered
Marked out of 1.00
Not flaggedFlag question
Question text
Requirment analysis does not study the diagram :
Select one:
a. Use Cases
b. Entity Relationship Diagram
c. State Transition Diagram
d. Activity Diagram
Clear my choice
Question 6
Not yet answered
Marked out of 1.00
Not flaggedFlag question
Question text
It is necessary to consult the following while drawing up requirement specification
Select one:
a. only top managers
b. only top and middle management
c. only top, middle and operational managers
d. top, middle and operational managers and also all who will use the system
Clear my choice
Question 7
Not yet answered
Marked out of 1.00
Not flaggedFlag question
Question text
In the system concepts, term Integration
Select one:
a. implies structure and order
b. refers to the manner in which each component functions with other components of the system.
c. means that parts of the computer system depend on one another.
d. refers to the holism of system
Clear my choice
Question 8
Not yet answered
Marked out of 1.00
Not flaggedFlag question
Question text
Which one of the following is not a step of requirement engineering?
Select one:
a. Requirment analysis
b. Requirement elicitation
c. Requirement design
d. Requirement documentation
Clear my choice
Question 9
Not yet answered
Marked out of 1.00
Not flaggedFlag question
Question text
and are the two major issues of Requirement Analysis.
Select one:
a. Performance, Design
b. Stakeholder, Developer
c. Functional, Non-Functional
d. None of the mentioned
Clear my choice
Question 10
Not yet answered
Marked out of 1.00
Not flaggedFlag question
Question text
What is the goal of requiremenst analysis and specification of software development life cycle?
Select one:
a. understanding the customer requirements and organize them in informal document
b. analysing the cost development
c. determing scope of software
d. None of the above
Clear my choice
Question 11
Not yet answered
Marked out of 2.00
Not flaggedFlag question
Question text
The steps which are considered in SDLC framewok :
Select one:
a. requirement gathering
b. system analysis
c. software design
d. all of the above
Clear my choice
Question 12
Not yet answered
Marked out of 2.00
Not flaggedFlag question
Question text
Requirements can be improved using :
Select one:
a. the waterfall model
b. prototyping model
c. the eolutionary model
d. the spiral model
Clear my choice
Question 13
Not yet answered
Marked out of 2.00
Not flaggedFlag question
Question text
Software development life cycle’s first step is :
Select one:
a. system design
b. coding
c. system testing
d. Preliminary Investigation and Analysis
Clear my choice
Question 14
Not yet answered
Marked out of 2.00
Not flaggedFlag question
Question text
The limitation of RAD is :
Select one:
a. It requires highly skilled developers/designers.
b. It necessitates customer feedbacks.
c. It increases the component reusability.
d. Both (a) & ( c)
Clear my choice
Question 15
Not yet answered
Marked out of 4.00
Not flaggedFlag question
Question text
“trial and error” method for identifying the way system will operate is
Select one:
a. systems development life cycle
b. prototyping
c. joint application design
d. custom development
Clear my choice
Question 16
Not yet answered
Marked out of 4.00
Not flaggedFlag question
Question text
In which model the requirement implementation by category is considered?
Select one:
a. Evolutionary Development Model
b. Waterfall Model
c. Prototyping
d. Iterative Enhancement Model
Clear my choice
Question 17
Not yet answered
Marked out of 4.00
Not flaggedFlag question
Question text
System development’s cross life cycle action is
Select one:
a. object modeling
b. prototyping
c. fact-finding
d. data modeling

We Also Provide SYNOPSIS AND PROJECT.
Contact www.kimsharma.co.in for best and lowest cost solution or
Email: amitymbaassignment@gmail.com
Call/what’s app: +91 8290772200
What’s app: +91 8800352777
Amity assignment solution help, Amity assignment answers help, Assignment Help

Leave a Reply

Your email address will not be published. Required fields are marked *